
Granada-based crane rental company Grúas Alhambra has taken delivery of a 450 tonne Grove GMK6450-1 All Terrain, the first of the model in Spain according to Manitowoc. Its first job is wind turbine maintenance.
The crane
| Specification | Value |
|---|---|
| Capacity | 450 t |
| Main boom | 15.4–60 m, five sections |
| Luffing jib | 25–79 m |
| Maximum tip height | 136 m |
| Engine | Mercedes-Benz OM473LA, 430 kW |
| Drive / steering | 12 x 8 x 12 |
| Counterweight | 135 t |
| Dimensions | from 3 m wide, 17.5 m long |
The key feature is the self-rigging MegaWingLift: two side struts with stays that relieve the boom. Grove says it raises capacities by up to 70 per cent on the main boom and up to 400 per cent on the luffing jib, and it goes on without an assist crane.
Why six axles
Alhambra says it chose the crane for its compact dimensions and for capacities usually found on seven or eight-axle machines. In wind work that means fewer support vehicles and easier access to hilltop turbines. Management notes a long relationship with Grove.
The trade-off is counterweight: within 12 tonnes per axle the crane travels with none on board, so all 135 tonnes follow on separate trucks.
For comparison, the largest Grove in Irish contractor Tusker's new fleet is the six-axle, 300 tonne GMK6300L-1; the GMK6450-1 handles one and a half times the load on the same number of axles. The contract value has not been disclosed.
Source: Manitowoc