
Five Potain flat top tower cranes – two MDT 269s and three MDT 319s – are working on the Mistral mixed-use development in Marseille. They come from the rental fleet of French crane company UPERIO, working for main contractor BEC Construction Provence, part of the Fayat group. Manitowoc announced the project on 5 November.
Configuration
The 30,000 square metre scheme sits in dense urban surroundings, with the cranes' working zones overlapping. All five have 45 metre jibs and are staggered in height:
- bases of 4.5 or 6 metres;
- hook heights from 42.3 to 60.6 metres;
- the tallest MDT 319 on a reinforced 6 metre base.
The cranes carry anti-collision systems, operator lifts in the tower and cameras. For three of them – two MDT 319s and one MDT 269 – Manitowoc engineers carried out additional configuration work to meet the site's structural and operating requirements.
Capacities
According to Potain, the MDT 269 lifts 10 or 12 tonnes depending on version, with around 3 tonnes at the tip of a 65 metre jib; the MDT 319 lifts 12 tonnes, with 3.2 tonnes at 70 metres. With 45 metre jibs on this site, tip loads will be considerably higher; Manitowoc has not published them.
Timing
Completion is planned for January 2028. Reports differ on erection time: Manitowoc and trade titles speak of two days, while French reports quoting UPERIO mention ten days for all five cranes. They may refer to different stages of the work. Which MDT 269 version is on site has not been stated.
Source: Construction Equipment