News

Three Liebherr 340 EC-B 12 flat tops at work on the Binnenhof restoration in The Hague

Three Liebherr 340 EC-B 12 flat tops at work on the Binnenhof restoration in The Hague

Three Liebherr 340 EC-B 12 flat top tower cranes have been erected on the restoration of the Binnenhof, the historic seat of the Dutch government in The Hague. Liebherr announced the installation on 13 November. The cranes are new and are being used by main contractor J.P. van Eesteren, part of the TBI Group; they were supplied through Dutch Liebherr dealer Van der Spek.

The cranes

The 340 EC-B 12 is a saddle jib crane without a tower head or tie bars above the jib. Its designation places it in the 340 tonne-metre class with a 12 tonne maximum capacity. On this site, the manufacturer says, jib lengths run to 75 metres.

The flat top layout suits the job. Where several cranes oversail one another, flat tops can be set with a smaller height difference between them, since nothing projects above the jib. On a dense group of listed buildings that means lower towers. Liebherr also points to the cranes' compact design, on a site with little room either for tower bases or for erection. When a luffing jib crane is the better choice is covered in our guide to luffing jib tower cranes.

The three cranes handle material supply and assembly work on the parliament and ministry buildings.

The project

The Binnenhof complex has been under comprehensive restoration and modernisation since 2021, with completion currently planned for 2030. Government business has continued throughout, and strict heritage conservation rules apply to the work. Liebherr describes the erection of the three cranes as the completion of a further project stage.

What the announcement leaves out

Tower heights, foundation types and the heaviest loads have not been given. Nor is there any account of how the cranes were brought in and erected inside the complex – usually the hardest part of a job like this – or of how long they will stay.

Source: Heavy Lift News