News

Potain MDT 99e: a 5 tonne flat top with a 55 metre jib and new controls

Potain MDT 99e: a 5 tonne flat top with a 55 metre jib and new controls

The newest Potain flat top is a small one. The MDT 99e lifts up to 5 tonnes, takes a jib of up to 55 metres and is meant for city sites with little room to spare. Manitowoc says it is the first Potain crane to use the CCS Evolution control system, and it has been designed to EN 14439:2025, the European tower crane standard that is about to take effect.

Key figures

SpecificationValue
Maximum capacity5 t (out to 16 m)
Jib length25–55 m
Tip load at 55 m1.2 t
Capacity at 40 m1.8 t
Hoist25 LVF 13 Optima, up to 45.5 m/min
Trolley speedup to 70 m/min
Reevingpermanent four-fall

Two motors drive the slew. Owners of Potain K mast sections (1.2 metre) or L sections can put the new crane on the towers they already have, so there is no need to buy new ones. The usual Potain options carry over: Potain Plus for higher load curves, Top Site to prevent collisions with other cranes, Power Control to adjust speeds to a weak site supply, and, at extra cost, the Ultra View cab with wide glazing.

Place in the range

Only one MDT model is smaller. By comparison, the MDT 269 and MDT 319 cranes now working on the Mistral development in Marseille lift 10–12 tonnes, with around three times the tip load on 65–70 metre jibs. The 5 tonner is aimed at a different kind of job – small housing and office buildings in tight streets, where a crane that goes up quickly and takes little space counts for more than reserve capacity.

Two control systems in a month

CCS Evolution updates the CCS controls found on Potain cranes made in Europe. Manitowoc's main point is that it is easy to set up for whichever operator is in the cab, which suits cranes that move between rental customers.

A week earlier, on 14 October, Manitowoc announced a different control platform, ECS (Ergo Control System), for the Potain cranes it builds in Pune, India, and Zhangjiagang, China, for emerging markets. Instead of bundles of individual wires, ECS uses a CAN bus; it also records operating data and makes faults quicker to trace.

Pricing and delivery dates for the MDT 99e have not been announced.

Source: Construction Equipment Guide