Sling length & angle calculator
Leg length, top-point height and angles of a symmetric two-leg sling from the span and the height, leg length or angle. Geometry only.
Result
Geometry of two equal straight legs. Sling forces, load capacity and hardware suitability are not assessed.
How the geometry is calculated
The model: two straight legs of equal length, lower points P₁ and P₂ on one horizontal line, top point A directly above their midpoint O, everything in one vertical plane. With a = B/2, the leg, the height and half the span form a right-angled triangle:
Span & height: S = √(a² + H²), β = atan(a / H)Span & leg length (S > B/2): H = S·√((1 − a/S)(1 + a/S))Span & angle (0° < β < 90°): S = a / sin β, H = a / tan βAlways: α = 90° − β, γ = 2β
Lengths are converted to metres first, using the international foot (0.3048 m) and inch (0.0254 m) as defined in NIST SP 811, Appendix B.9. Lengths are shown to 8 significant digits and angles to 6 decimals; the copied text also contains 15 digits.
S is the geometric distance between the assumed connection points. The working or ordering length of a finished sling with eyes, hooks, shackles and a master link depends on how its documentation defines length — the calculator adds or subtracts nothing for fittings. The symmetric layout is geometry only: it does not show that the centre of gravity is in the middle or that both legs carry the same load.
The calculator does not work out leg forces, the working load limit, permitted sling angles or suitable hardware. Check those against the sling manufacturer’s data and the rules that apply to your lift.