
Tadano is bringing the AC 4.100L-1 back into its product range. The company announced on 17 November that production of the 100 tonne, four-axle All Terrain crane will resume, with first deliveries to customers due in early 2028, according to a company spokesperson.
The crane
| Specification | Value |
|---|---|
| Maximum capacity | 100 t at 2.5 m radius |
| Main boom | 12.0–59.4 m |
| Maximum radius | 54 m |
| Maximum tip height | 84 m |
| Carrier engine | Mercedes-Benz, 340 kW |
| Superstructure engine | 129 kW |
| Drive / steering | 8 x 4 x 8 |
| Length × width × height | 13.37 × 2.75 × 3.92 m |
A bi-fold swingaway jib of 10 to 19 metres can be offset by up to 40 degrees. The crane uses two engines, so the 340 kW carrier unit does not have to run during lifting – a feature that owners cite as a reason for buying it, Tadano says.
Its place in the class
A 100 tonne rating and an almost 60 metre boom put the AC 4.100L-1 at the top of the four-axle class. German rental companies describe it as filling the gap between the 80 tonne AC 4.080-1 and five-axle cranes, and note that it stays within 12 tonnes per axle for permit-free travel in most of Europe (see our article on axle loads).
Its main competitor is the Liebherr LTM 1100-4.2. Liebherr raised the bar for four-axle cranes last year with the 120 tonne LTM 1120-4.1 and its 66 metre boom.
Where it will be built
Production returns to Tadano's German plant in Zweibrücken, where the model was built before. Board member Dean Barley says the group has invested around EUR 100 million in its two German plants, Zweibrücken and Lauf, over the past two years.
What has not been said
Tadano has not explained when or why production of the AC 4.100L-1 stopped. Customer reports show units still being handed over in 2025, possibly from earlier production. The company has also not said whether the new series will bring design or equipment changes, or what it will cost.
Source: Cranes & Lifting